Skip to content

What damp pellets can do to the auger and fire pot

Checked November 16, 2026

The grill jammed. Or it lit, then sulked, with a weak fire and wandering heat. You'd used old pellets from the bottom of the bin.

Here's the likely chain of events, then what to do. Your grill's manual is the final word on every step.

The parts involved

Three parts matter. The hopper holds the pellets. The auger is a screw that carries them toward the fire. The fire pot is the small cup where they burn.

In a typical design, a sensor feeds the grill's temperature to a controller, and the controller runs the auger.1 If the auger can't feed, the controller has nothing to adjust.

How damp pellets reach the auger

Moisture can expand the wood and make it crumbly.2 A general reference adds that with a little water, pellets expand and turn back into sawdust.3

That's the link between a damp bag and a stuck screw. The makers don't spell out the mechanics further, so the manual for your grill is the place to look.

How damp pellets lead to a jamPellets take in moistureThey swell and crumbleThe auger can clogFire is weak, or never starts
Each step makes the next one more likely.

Symptom one: a jam

Crumbly pellets can clog the auger and may fail to light, per Traeger.2 Pit Boss adds that emptying the hopper can also help prevent your auger from jamming.4

If your grill has jammed, follow the manual's steps for clearing it. Don't take apart the auger motor or tube unless the manual says you may. Follow its power-off and cool-down steps before you reach near any part.

Symptom two: it won't light, or heat wanders

Pit Boss lists two effects of damp pellets: wandering temperature, or no ignition at all.4

So a grill that keeps stalling at start-up, or can't hold a steady heat, may be getting poor fuel. It isn't the only possible cause. Igniter faults and other problems exist too, and the manual covers those.

Symptom three: weak, smouldering fire and odd smoke

Dampness can affect the burn quality of wood, which affects the amount of smoke the pellets can produce.4

The makers don't describe a smouldering fire pot, but it's a possibility with poor fuel. Follow your manual's light-up and restart steps.

Order of fixes

  1. Stop the cook and let the grill shut down as the manual says.
  2. Check the pellets with the look-and-snap steps on the damp-signs page.
  3. Empty the damp pellets as your manual describes and replace them with dry ones.
  4. Clear the jam only as the manual instructs.
  5. Fix the storage so it doesn't repeat. The pages on how moisture gets in and on containers help.

Pellets in the hopper count too. The hopper page explains when to empty them.

Keep the grill outdoors

Never run a pellet grill in a garage, tent or other closed space while you sort this out. Carbon monoxide can kill. Work outdoors, in the open.

Notes and sources

  1. Pellet grill, Wikipedia
  2. How to Store Wood Pellets, Traeger Grills
  3. Pellet fuel, Wikipedia
  4. The Do's & Don'ts of Proper Wood Pellet Storage, Pit Boss